Three factors are relevant for designing suitable filtration technology in the machining of metal workpieces:
- Type of machining: turning, milling, sawing, drilling, etc.
- Application of coolants: oil, emulsion, MQL
- Materials: grey cast iron and high carbon steel, light metals, non-ferrous metals, as well as alloys
The machinery area must be kept clean and it must be ensured that the contaminated air cannot escape.
Additional factors to be considered in the design:
- Coolant pressure
- Internal dimensions of the machine
- Size of the machine opening (for loading of workpiece, tool exchange)
- Harmful characteristics of materials to be separated
A variety of solutions depend on the process and the coolant used:
Oil: AERO oil mist separator;
Coolant: ENA coolant mist separator;
MQL: TR-1 dry separator or VARIO with FLEXI-P;
Dry separation: VARIO dry separator or UNI-STAR
Another vital consideration is whether the extracted air can be recirculated back into the production area.
The capture elements can be designed or optimized individually based on a flow simulation to significantly improve the reliability of the entire system.
Brochure "AERO oil mist separator for cooling lubricant aerosols"
Brochure "ENA coolant mist separator for cooling lubricant aerosols"
Brochure "TR-1 single separator for MQL and dry processes"
Would you like to get further information or do you have a certain request? Please do not hesitate to get in touch with us - our experts will come back to you as soon as possible!
Used products
Dry separator VARIO eco >>
Single separator TR-1 >>
Oil mist separator AERO >>
Emulsion mist separator ENA >>
Chip pre-separator ProChip >>
Air flow control ProFix >>
Filter element KLR-Filter >>
Cartridge filter FLEXI-P >>
Explosion protection
Information about "explosion protection according to ATEX" >>
Back pressure flap ProFlap >>
Flameless pressure relief ProPipePlus >>