-
The VARIO eco dust collector extracts dust emissions efficiently and safely from the engine room. -
GRP and CFC processing using a vertical suction flow inside the workspace, supplemented by nozzle extraction in close proximity to the spindle. Robotic cross flow dust extraction inside the processing booth. The dust can be collected at the exact location of the tool by means of movable suction. -
CFC and GRP dusts which are not classified as carcinogens are approved for clean air recirculation up to a 66 - 70% ratio. Adequate fresh air must be ensured. The KLR-Filters® in particular ensure that a maximum dust concentration of 0.25 mg/m3 can be easily achieved with the recirculated clean air while maintaining energy efficiency. -
ProFlap back pressure flap prevents the spread of explosion pressure and flames into other areas.
Constructional measures for explosion protection by means of reducing the explosion pressure. Q-Box is a flameless pressure relief system with bursting disk and metal mesh wire for a quick reduction of heat build-up.